Experience with a 180 degree rotated 16V RWD conversion?

Road-race engines and ancillaries - general discussion
Post Reply
markwnz
Posts: 6
Joined: June 27th, 2020, 8:23 am
Contact:

Experience with a 180 degree rotated 16V RWD conversion?

Post by markwnz » June 26th, 2021, 12:58 am

I'm curious to hear more about conversions like Carlos' with RWD 16V 180 degree rotated head conversions (see here viewtopic.php?t=2416). There isn't much info online about the work required.

Are there any other members out there that might have experience with the work involved? Or is there somewhere I can contact Carlos? GC indicates that the work required is "not overly difficult".

Wal
Posts: 40
Joined: July 2nd, 2006, 7:22 pm
Location: Denham, Bucks, UK
Contact:

Re: Experience with a 180 degree rotated 16V RWD conversion?

Post by Wal » June 29th, 2021, 3:07 pm

I'd be really interested to know more from anyone who has actually done this conversion please.

Regards,
Wal

Kerem1967
Posts: 32
Joined: December 26th, 2012, 9:08 pm
Contact:

Re: Experience with a 180 degree rotated 16V RWD conversion?

Post by Kerem1967 » July 20th, 2021, 11:12 am

markwnz wrote:
June 26th, 2021, 12:58 am
I'm curious to hear more about conversions like Carlos' with RWD 16V 180 degree rotated head conversions (see here viewtopic.php?t=2416). There isn't much info online about the work required.

Are there any other members out there that might have experience with the work involved? Or is there somewhere I can contact Carlos? GC indicates that the work required is "not overly difficult".
Did you send a DM to Carlos to find out how he has swapped the cams end to end ?
GC_90

markwnz
Posts: 6
Joined: June 27th, 2020, 8:23 am
Contact:

Re: Experience with a 180 degree rotated 16V RWD conversion?

Post by markwnz » July 22nd, 2021, 5:45 am

@Kerem1967 I'm not aware of his presence on the forum (note he isn't active on the thread I linked above).

Kerem1967
Posts: 32
Joined: December 26th, 2012, 9:08 pm
Contact:

Re: Experience with a 180 degree rotated 16V RWD conversion?

Post by Kerem1967 » July 26th, 2021, 2:22 pm

markwnz wrote:
July 22nd, 2021, 5:45 am
@Kerem1967 I'm not aware of his presence on the forum (note he isn't active on the thread I linked above).
Ohh, I see. Pity !!
GC_90

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests