Page 1 of 1
My new hand-made turbo exhaust manifold
Posted: September 29th, 2006, 6:12 pm
by cantfindausername
Posted: September 29th, 2006, 7:13 pm
by Guy Croft
Looks handsome to me Ant!
GC
Posted: September 30th, 2006, 9:54 am
by cantfindausername
yes I'm really pleased with it.
I'm thinking of getting a new flange on it though as mine is a 9stud head, and this was fashioned on the earlier 6 stud heads. I also want to get some bracing put through it just to be safe.
All still a long way off though, but those are my plans.... I think
Ant
Posted: September 30th, 2006, 11:27 am
by SteveNZ
Is this for your Toyota? It would appear you have dropped the CT26 for some kind of Garrett turbo and a 38mm gate. What do you have planned?
Posted: September 30th, 2006, 2:57 pm
by cantfindausername
Indeed it is.
I will be running the stock in & ex. manifolds, and the stock CT26 while I run in the engine, but I will then be swapping them out for this manifold, a big side feed inlet manifold and 75mm throttle body, and a Garrett GT35R turbo!
Should be quite impressive once its all fuelled/mapped etc. Still seems like such a long way off though at the moment.
Posted: September 30th, 2006, 7:10 pm
by Evodelta
I like the look of that Ant, looks very well made: A split in the mounting flange for expansion and a proper pyramid collector inside too. Nice!
