I'm curious to hear more about conversions like Carlos' with RWD 16V 180 degree rotated head conversions (see here viewtopic.php?t=2416). There isn't much info online about the work required.
Are there any other members out there that might have experience with the work involved? Or is there somewhere I can contact Carlos? GC indicates that the work required is "not overly difficult".
Experience with a 180 degree rotated 16V RWD conversion?
-
- Posts: 6
- Joined: June 27th, 2020, 8:23 am
- Contact:
-
- Posts: 43
- Joined: July 2nd, 2006, 7:22 pm
- Location: Denham, Bucks, UK
- Contact:
Re: Experience with a 180 degree rotated 16V RWD conversion?
I'd be really interested to know more from anyone who has actually done this conversion please.
Regards,
Wal
Regards,
Wal
-
- Posts: 39
- Joined: December 26th, 2012, 9:08 pm
- Contact:
Re: Experience with a 180 degree rotated 16V RWD conversion?
Did you send a DM to Carlos to find out how he has swapped the cams end to end ?markwnz wrote: ↑June 26th, 2021, 12:58 am I'm curious to hear more about conversions like Carlos' with RWD 16V 180 degree rotated head conversions (see here viewtopic.php?t=2416). There isn't much info online about the work required.
Are there any other members out there that might have experience with the work involved? Or is there somewhere I can contact Carlos? GC indicates that the work required is "not overly difficult".
GC_90
-
- Posts: 6
- Joined: June 27th, 2020, 8:23 am
- Contact:
Re: Experience with a 180 degree rotated 16V RWD conversion?
@Kerem1967 I'm not aware of his presence on the forum (note he isn't active on the thread I linked above).
-
- Posts: 39
- Joined: December 26th, 2012, 9:08 pm
- Contact:
Who is online
Users browsing this forum: No registered users and 22 guests