Minimum lenght of intake manifold for DCOE.
Posted: June 20th, 2016, 8:48 am
Hello.
Dear GC, could you tell me which lenght is minimum for intake manifold lenght for 45 DCOE in my spec. 2L TC ? The whole spec. of my engine you have here. The excepted output that I want to get it was also placed in thread below.
viewtopic.php?f=13&t=3377
I want to make a 2.75" manifold, but after first test it will be a very complicated to make and fit in a really tidy 125p engine bay, especially if I want to make also a sealed cold air intake system.
I made some 3D models of DCOE flange, cylinderhead flange etc., I will share with you and members soon.
Thanks.
Piotrek.
Dear GC, could you tell me which lenght is minimum for intake manifold lenght for 45 DCOE in my spec. 2L TC ? The whole spec. of my engine you have here. The excepted output that I want to get it was also placed in thread below.
viewtopic.php?f=13&t=3377
I want to make a 2.75" manifold, but after first test it will be a very complicated to make and fit in a really tidy 125p engine bay, especially if I want to make also a sealed cold air intake system.
I made some 3D models of DCOE flange, cylinderhead flange etc., I will share with you and members soon.
Thanks.
Piotrek.