Camshaft for my 8v, 2 Liter
-
- Posts: 6
- Joined: December 1st, 2013, 8:23 pm
- Contact:
Camshaft for my 8v, 2 Liter
Would camshaft , P/N 4334837, from a early Fiat, be a good fit for my 8v/2 Liter engine that I am having rebuilt. The engine will have a 10:1 compression ratio and twin weber IDF 40's. Have a chance to purchase this cam, bran new, although the purchase does not include the exhaust cam. Any suggestions will be greatly appreciated.
GC_65
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Camshaft for my 8v, 2 Liter
Sorry - I just do not know what engine this part number relates to..
G
G
Guy Croft, owner
-
- Posts: 2
- Joined: April 11th, 2014, 1:43 pm
- Contact:
Re: Camshaft for my 8v, 2 Liter
*General internet forum accuracy not withstanding...
Another Fiat forum has 4334837 as a Pittatore camshaft:
Seemingly from a Fiat 2L TC 131 racing. Higher lift cam @9.900mm lift, with 15/55 57/13 cam timing 245 degrees. Pittatore call these a B26.
Fiat 4334837 wide lobe intake (245 @ 0.80mm) 9.900mm lift
Another Fiat forum has 4334837 as a Pittatore camshaft:
Seemingly from a Fiat 2L TC 131 racing. Higher lift cam @9.900mm lift, with 15/55 57/13 cam timing 245 degrees. Pittatore call these a B26.
Fiat 4334837 wide lobe intake (245 @ 0.80mm) 9.900mm lift
GC_81
-
- Posts: 6
- Joined: December 1st, 2013, 8:23 pm
- Contact:
Re: Camshaft for my 8v, 2 Liter
Gary, thanks for that information. Would you have an opinion as to rather or not this would be a good inlet cam for me rebuild ?
Guy if you read this thread I would like your opinion also.
Again thank you Gary.
Guy if you read this thread I would like your opinion also.
Again thank you Gary.
GC_65
-
- Posts: 2
- Joined: April 11th, 2014, 1:43 pm
- Contact:
Re: Camshaft for my 8v, 2 Liter
Hi wfolland,
The info I posted was only what I found whilst trawling the net. As I said the usual caveats about trusting internet-sourced info apply ! (although it did come from a Fiat forum).
Just trying to help you narrow down where the cam might have come from.
Unfortunately I'm better at finding info on the net than I am advising on parts suitability so will defer to more knowledgeable members to provide help.
The info I posted was only what I found whilst trawling the net. As I said the usual caveats about trusting internet-sourced info apply ! (although it did come from a Fiat forum).
Just trying to help you narrow down where the cam might have come from.
Unfortunately I'm better at finding info on the net than I am advising on parts suitability so will defer to more knowledgeable members to provide help.
GC_81
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Camshaft for my 8v, 2 Liter
I think those numbers are the blank (chill cast) rather than the part number..
G
G
Guy Croft, owner
-
- Posts: 6
- Joined: December 1st, 2013, 8:23 pm
- Contact:
Re: Camshaft for my 8v, 2 Liter
Thanks Guy, will do some more research myself to determine exactly where and to what camshaft this this P/N can be associated to.
GC_65
Who is online
Users browsing this forum: No registered users and 8 guests