Race Engine Forum UK

Would camshaft , P/N 4334837, from a early Fiat, be a good fit for my 8v/2 Liter engine that I am having rebuilt. The engine will have a 10:1 compression ratio and twin weber IDF 40's. Have a chance to purchase this cam, bran new, although the purchase does not include the exhaust cam. Any suggestions will be greatly appreciated.

Sorry - I just do not know what engine this part number relates to..

G

*General internet forum accuracy not withstanding...

Another Fiat forum has 4334837 as a Pittatore camshaft:

Seemingly from a Fiat 2L TC 131 racing. Higher lift cam @9.900mm lift, with 15/55 57/13 cam timing 245 degrees. Pittatore call these a B26.

Fiat 4334837 wide lobe intake (245 @ 0.80mm) 9.900mm lift

Gary, thanks for that information. Would you have an opinion as to rather or not this would be a good inlet cam for me rebuild ?

Guy if you read this thread I would like your opinion also.

Again thank you Gary.

Hi wfolland,

The info I posted was only what I found whilst trawling the net. As I said the usual caveats about trusting internet-sourced info apply ! (although it did come from a Fiat forum).

Just trying to help you narrow down where the cam might have come from.

Unfortunately I'm better at finding info on the net than I am advising on parts suitability so will defer to more knowledgeable members to provide help.

I think those numbers are the blank (chill cast) rather than the part number..

G

Thanks Guy, will do some more research myself to determine exactly where and to what camshaft this this P/N can be associated to.