Thank you Guy.
Port angle as measured is as close to 45 degrees as i could measure, from the intake manifold face meaning if my math is up to par 45 degrees from the combustion face also.
The seat profile is as per OEM with the seat taken out to to diameter of the valve.
The head is Volkswagen Golf Mk1, "DX" model code, you've likely done many of them I would think.
I hope these photos will do, I dont appear to have one with the port angle in a profile type of shot unfortunately.
Best wishes, Tony.
Self build flow bench
-
- Posts: 205
- Joined: March 20th, 2007, 1:20 pm
- Location: Midlands UK (A)
- Contact:
Re: Self build flow bench
Tony Warren. GC #96.
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Self build flow bench
Thanks Tony
yes - a fair bit of downdraft - those seat angles should be OK. Thanks for the pics.
G
yes - a fair bit of downdraft - those seat angles should be OK. Thanks for the pics.
G
Who is online
Users browsing this forum: No registered users and 5 guests