Combustion chamber damage
Posted: June 18th, 2011, 1:39 am
Today i was given a head to clean up and assemble for a friends fast road project.
Upon closer inspection i found that one of the combustion chambers had some damage.
Not sure if something fell into the chamber or if it was roughly handled prior to its last fitting. Doesnt look like detonation.
I was thinking of smoothing the rough edges over, so as not to create any hot spots and using it.
Maybe even take a little out of the other 4 chambers to equalise compression. I dont think squish will suffer.
What are peoples thoughts on this?
Upon closer inspection i found that one of the combustion chambers had some damage.
Not sure if something fell into the chamber or if it was roughly handled prior to its last fitting. Doesnt look like detonation.
I was thinking of smoothing the rough edges over, so as not to create any hot spots and using it.
Maybe even take a little out of the other 4 chambers to equalise compression. I dont think squish will suffer.
What are peoples thoughts on this?