Fiat twin cam - 1367 cc
-
- Posts: 6
- Joined: February 24th, 2009, 8:06 pm
Fiat twin cam - 1367 cc
This is an engine capacity not sold in the UK/Ireland but I have a question that someone here may be able to answer.
The head gasket on my LHD Italian sourced Fiat 131 is gone and I need to know if a head gasket from a 1600 (1585) or 2000 (1995) twin cam will fit? Any ideas?
Thanks
The head gasket on my LHD Italian sourced Fiat 131 is gone and I need to know if a head gasket from a 1600 (1585) or 2000 (1995) twin cam will fit? Any ideas?
Thanks
-
- Posts: 6
- Joined: February 24th, 2009, 8:06 pm
Re: Fiat twin cam - 1367 cc
Update - I have discovered from the Fiat 131 brochure that this gasket is unique ..specced to fit a 78mm cylinder bore.
I desperately now need to source this as I am planning to drive the car to Turin in 3 weeks time. The gasket may be the same as fitted to 1400cc Lancia Betas.
Thanks in advance
I desperately now need to source this as I am planning to drive the car to Turin in 3 weeks time. The gasket may be the same as fitted to 1400cc Lancia Betas.
Thanks in advance
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Fiat twin cam - 1367 cc
Trevor Nicosia, member nyssa7 is an agent for Spesso, you could try asking him
GC
GC
-
- Posts: 6
- Joined: February 24th, 2009, 8:06 pm
Re: Fiat twin cam - 1367 cc
Thanks GC - In the meantime my fellow club members have managed to source one in Germany for me - Hope to arrive tomorrow via DHL. Fingers crossed.
thank you.
thank you.
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Fiat twin cam - 1367 cc
I'd very much like some pictures of this unit - esp with head off. I had heard of it but never seen one, thus pretty rare I guess.
I have no idea what cars it was used in either,
G
I have no idea what cars it was used in either,
G
-
- Posts: 101
- Joined: June 22nd, 2006, 7:47 pm
- Location: Taupo, New Zealand
- Contact:
Re: Fiat twin cam - 1367 cc
I'm pretty sure it was available in some Italian market 131's and beta's - my guess would be they reduced the displacement to come in under some displacement tax or similar legality.
-
- Posts: 6
- Joined: February 24th, 2009, 8:06 pm
Re: Fiat twin cam - 1367 cc
Hi Guy - Unfortunately I was not around for the head gasket replacement but I do have some pics of the engine and old gasket post operation. I've added them to this posting. If you would like any other angles just shout. (just noticed under the preview function that only a portion of each picture is showing...???)
The engine itself runs sweetly as you expect from such a low mileage unit (31000 kms) - It keeps up with modern traffic with ease and has pushed my brick shaped 131 to an indicated 180 km/h. However it does not have the grunt of a 2 litre unit (as fitted to my Sport) and I would like a more powerful unit one day.
The engine itself runs sweetly as you expect from such a low mileage unit (31000 kms) - It keeps up with modern traffic with ease and has pushed my brick shaped 131 to an indicated 180 km/h. However it does not have the grunt of a 2 litre unit (as fitted to my Sport) and I would like a more powerful unit one day.
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Fiat twin cam - 1367 cc
Thanks for those nice photos!
What is the standard bore & stroke on that? Accepting that there don't seem to be many around, it would be a great engine in a competition 1400cc class.
G
What is the standard bore & stroke on that? Accepting that there don't seem to be many around, it would be a great engine in a competition 1400cc class.
G
-
- Posts: 101
- Joined: June 22nd, 2006, 7:47 pm
- Location: Taupo, New Zealand
- Contact:
Re: Fiat twin cam - 1367 cc
78mm x 71.5mm = 1366.6cc 1585cc engine with a reduced bore? I wonder about the bore offset on cyl 1 and 4? do these have smaller valves or a different head? do you have any pictures of the block and head face?
Who is online
Users browsing this forum: No registered users and 72 guests