Porting tools. what do you use to make this easier?
Posted: July 3rd, 2008, 12:27 am
Hi.
idea is to start a thread containing tools (either bought or fabricated) that make life easier when porting.
I recently aquired this set of cheap inside measurement tools.
it consists of two spring loaded pins with dome ends that can be locked on place by twisting the handle. it works well for comparing/copying ports.
idea is to start a thread containing tools (either bought or fabricated) that make life easier when porting.
I recently aquired this set of cheap inside measurement tools.
it consists of two spring loaded pins with dome ends that can be locked on place by twisting the handle. it works well for comparing/copying ports.
- IMG_0965.jpg (127.94 KiB) Viewed 4859 times