1592 132AB0 engine overboring
Posted: April 4th, 2008, 2:26 pm
I compared the 1800 132 block I have with a 1592 (132 AB0) block I recently found and saw that the only difference was the bore. Seems that this block will easily accept the 84mm piston (instead of 80 mm it has now)
without any problem. The machine shop told me is easy since the two block use the same 79.2 crank.
It is true or there is any tricky point?
Achy
without any problem. The machine shop told me is easy since the two block use the same 79.2 crank.
It is true or there is any tricky point?
Achy