Guy Croft Lada Riva Twin Cam replica
-
- Posts: 317
- Joined: August 8th, 2011, 1:04 pm
- Location: Finland
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
I can pretty much follow the others there.
I like the clean rally-style interiors in Ladas. That is much better suited to this car. Factory materials insulate noise very little and usually they sit terribly when you remove them once. And there is always some parts dropping out here and there when you drive.
These cars aren't designed to be quiet. So making these cars quiet is almost impossible.
Ian - that handbrake cable setup inside the car is very common in rally Ladas which doesn't have hydraulic handbrake. Cables under the car are too vulnerable.
There is gonna be soon one Lada topic more here and it's gonna be partially like this. More to come.
T
I like the clean rally-style interiors in Ladas. That is much better suited to this car. Factory materials insulate noise very little and usually they sit terribly when you remove them once. And there is always some parts dropping out here and there when you drive.
These cars aren't designed to be quiet. So making these cars quiet is almost impossible.
Ian - that handbrake cable setup inside the car is very common in rally Ladas which doesn't have hydraulic handbrake. Cables under the car are too vulnerable.
There is gonna be soon one Lada topic more here and it's gonna be partially like this. More to come.
T
GC_25
Re: Guy Croft Lada Riva Twin Cam replica
Hi folks.
Just a quick refresh, sorry for the lack of technical detail, ...I don't have the time at the moment, just didn't want the thread going stagnant.
As you can see the Lada is rapidly approaching completion, Guy has almost completed the Stage 3 Fiat Twin Cam engine, so more on that soon! We're really looking forward to doing the engine install and commission. So in the meantime me and Jackie thought we'd take advantage of the rare crisp winter sun and push it outside for a bit of an interim photo shoot before the final stage of the build commences.(oh and give the shed a jolly good scrub)
Hope you like :)
Nix
Just a quick refresh, sorry for the lack of technical detail, ...I don't have the time at the moment, just didn't want the thread going stagnant.
As you can see the Lada is rapidly approaching completion, Guy has almost completed the Stage 3 Fiat Twin Cam engine, so more on that soon! We're really looking forward to doing the engine install and commission. So in the meantime me and Jackie thought we'd take advantage of the rare crisp winter sun and push it outside for a bit of an interim photo shoot before the final stage of the build commences.(oh and give the shed a jolly good scrub)
Hope you like :)
Nix
- Attachments
-
- l1r (920 x 541).jpg (128.44 KiB) Viewed 45769 times
-
- l2r (920 x 690).jpg (212.11 KiB) Viewed 45767 times
-
- l3r (920 x 690).jpg (220.02 KiB) Viewed 45767 times
-
- l4r (920 x 690).jpg (171.22 KiB) Viewed 45767 times
-
- l5r (920 x 690).jpg (186.69 KiB) Viewed 45767 times
-
- l6r (920 x 690).jpg (174.63 KiB) Viewed 45767 times
-
- l7r (920 x 690).jpg (220.27 KiB) Viewed 45766 times
-
- l8r (920 x 690).jpg (188.98 KiB) Viewed 45766 times
-
- l9r (648 x 486).jpg (88.27 KiB) Viewed 45766 times
-
- l10r (648 x 486).jpg (106.14 KiB) Viewed 45766 times
-
- l11r (648 x 486).jpg (86.85 KiB) Viewed 45766 times
-
- l12r (648 x 486).jpg (91.41 KiB) Viewed 45766 times
-
- l13r (648 x 486).jpg (88.71 KiB) Viewed 45766 times
-
- l14r (648 x 486).jpg (71.32 KiB) Viewed 45766 times
-
- l15r (648 x 486).jpg (83.14 KiB) Viewed 45766 times
-
- l16r (648 x 486).jpg (84.68 KiB) Viewed 45766 times
-
- l17r (648 x 486).jpg (82.96 KiB) Viewed 45766 times
-
- l18r (648 x 486).jpg (73.12 KiB) Viewed 45766 times
Last edited by badlyworntoy on November 11th, 2012, 1:01 am, edited 7 times in total.
-
- Posts: 54
- Joined: October 23rd, 2007, 8:42 pm
- Location: Barnsley, South Yorks. UK (A)
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
That looks brilliant!! Love the dimensions of the Lada with its stubby nose and big rear overhang. I bet not many people know what it is when they first see it.
-
- Posts: 317
- Joined: August 8th, 2011, 1:04 pm
- Location: Finland
- Contact:
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
et voila!
Fully-loaded 187bhp StIII spec of course...
G
Fully-loaded 187bhp StIII spec of course...
G
- Attachments
-
- NIX_toothed belt system fitted.JPG (601.22 KiB) Viewed 45790 times
-
- NIX_toothed belt system fitted (1).JPG (135.46 KiB) Viewed 45790 times
-
- IMG_6779.JPG (111.21 KiB) Viewed 45789 times
-
- IMG_6787.JPG (91.42 KiB) Viewed 45789 times
-
- IMG_6784.JPG (122.21 KiB) Viewed 45789 times
-
- IMG_6730.JPG (125.09 KiB) Viewed 45789 times
-
- IMG_6727.JPG (88.46 KiB) Viewed 45789 times
-
- IMG_6737.JPG (164.03 KiB) Viewed 45789 times
-
- IMG_6738.JPG (120.66 KiB) Viewed 45789 times
-
- IMG_6739.JPG (109.92 KiB) Viewed 45789 times
-
- IMG_6729.JPG (83.51 KiB) Viewed 45789 times
-
- SUMP BY NIX HIMSELF AND A 1ST CLASS EFFORT FOR HIS 1ST GO AT THIS DIFFICULT FABRICATION OP!!
- IMG_6777.JPG (99.6 KiB) Viewed 45789 times
-
- FANTASTIC INLET MANIFOLD BY NIX & BOGG BROTHERS - AN EXCELLENT JOB THAT FITS LIKE A GLOVE AND TICKS ALL THE BOXES IN MY BOOK!
- IMG_6799.JPG (484.25 KiB) Viewed 45789 times
-
- IMG_6715.JPG (108.7 KiB) Viewed 45789 times
-
- IMG_6711.JPG (119.51 KiB) Viewed 45789 times
-
- IMG_6710.JPG (111.56 KiB) Viewed 45789 times
-
- WHERE IT ALL BEGAN......
- IN_crankcase after prelim clean.JPG (121.75 KiB) Viewed 45789 times
-
- HAD TO PAINT IT BLACK BUT - HEY - I LIKE NIX..
- IMG_5453.JPG (158.19 KiB) Viewed 45788 times
-
- IMG_5295.JPG (141.32 KiB) Viewed 45788 times
-
- IMG_5296.JPG (153.69 KiB) Viewed 45788 times
-
- FAILURE TO CLEAN PROPERLY IS WHERE SO MANY BUILDS BY SO MANY DIY ENTHUSIASTS AND PROS FALLS DOWN - I SEE 'DIRTY' BUILDS ALL THE TIME AND THEY KNOCK THE ENGINE TO PIECES...
- IMG_5298.JPG (166.11 KiB) Viewed 45788 times
Guy Croft, owner
-
- Posts: 87
- Joined: August 24th, 2010, 11:58 am
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
Lovely stuff as always from Guy (and Ian).
What types of bolts are those on the flywheel?
What types of bolts are those on the flywheel?
Chris Burgess
GC 01
GC 01
-
- Posts: 687
- Joined: December 3rd, 2007, 3:40 pm
- Location: Warsaw suburb , Poland
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
Fantastic job,
Really well done !
Congratulations !
Question on rear mounting of the safety belts.
Could you post a picture of rear seat belts the mounting. please .
Miro
Really well done !
Congratulations !
Question on rear mounting of the safety belts.
Could you post a picture of rear seat belts the mounting. please .
Miro
www.Fiat-abarth-rally.com
GC_93
GC_93
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
Engine for Nix near ready for test.
44IDF inlet manifold by Nix himself and a nice job. Designed for the available space!
GC
44IDF inlet manifold by Nix himself and a nice job. Designed for the available space!
GC
- Attachments
-
- IMG_7024.JPG (135.24 KiB) Viewed 45513 times
-
- IMG_7025.JPG (133.35 KiB) Viewed 45513 times
-
- IMG_7026.JPG (117.02 KiB) Viewed 45513 times
-
- IMG_7002.JPG (105.47 KiB) Viewed 45513 times
Guy Croft, owner
-
- Posts: 317
- Joined: August 8th, 2011, 1:04 pm
- Location: Finland
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
Ian and Guy:
This is certainly the best Lada project I've ever seen am I'm not lying. Only true Englishman's could produce something like this. Ian's great craftmanship combined with Guys knowledge with Fiat TC engines; could there be anything better?
T
This is certainly the best Lada project I've ever seen am I'm not lying. Only true Englishman's could produce something like this. Ian's great craftmanship combined with Guys knowledge with Fiat TC engines; could there be anything better?
T
GC_25
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
Nix's engine close to test
G
G
- Attachments
-
- super high power electronic distr by H&H (see links) - those guys are GOOD. And very good to me.
- IMG_7029.JPG (123.37 KiB) Viewed 45473 times
-
- FINAL SHIM CHECK B4 TEST
- IMG_7030.JPG (136.41 KiB) Viewed 45473 times
-
- 90% RIGGED FOR TEST ON SUNDAY 2ND DEC
- IMG_7032.JPG (660.69 KiB) Viewed 45473 times
Guy Croft, owner
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
There is some film of Nix's engine on hot test at my works today on my Youtube channel
www.youtube.com
channel is Guy Croft
I cannot upload video of any real size here.
G
www.youtube.com
channel is Guy Croft
I cannot upload video of any real size here.
G
Guy Croft, owner
Re: Guy Croft Lada Riva Twin Cam replica
OK people another very swift update, sorry I'm not one for stopping and documenting work, a legacy from all the "Job and Knocks" I've been on over the years I think.
So then the new GC engine is now installed in its final resting place. It really looks so cool we keep wasting time just standing and staring at it.
I was (pre engine collection) thinking this final stage of the build would be a breeze because as usual I thought I'd covered all the engineering, but again due to lots of assumption I managed to create loads of work for myself by not mocking up every last nut/bolt/pipe/mounting and as usual that means re-doing everything 6 times (I've been doing this for years and I never seem to learn). Take note: - always mock up every last detail!!!
Engine runs beautifully at static although the Race plugs aren’t very happy being repeatedly stopped and started. I've (On GC's advice) temporarily fitted a set of BPR6C's while we get the car commissioned. I've yet to drive it under load as I need to engineer a suitable sealed air box/induction system but have no doubt about the perfmance this thing is going to generate.
I'm expecting the car to be totally completed by the end of the month and I'll endeavor to include lots of pictures and experiences as I learn all about the way she performs.
Also look out for The Retro Cars Magazine feature expected to be published in the April or May Issue.
Catch you all soon
Nix
So then the new GC engine is now installed in its final resting place. It really looks so cool we keep wasting time just standing and staring at it.
I was (pre engine collection) thinking this final stage of the build would be a breeze because as usual I thought I'd covered all the engineering, but again due to lots of assumption I managed to create loads of work for myself by not mocking up every last nut/bolt/pipe/mounting and as usual that means re-doing everything 6 times (I've been doing this for years and I never seem to learn). Take note: - always mock up every last detail!!!
Engine runs beautifully at static although the Race plugs aren’t very happy being repeatedly stopped and started. I've (On GC's advice) temporarily fitted a set of BPR6C's while we get the car commissioned. I've yet to drive it under load as I need to engineer a suitable sealed air box/induction system but have no doubt about the perfmance this thing is going to generate.
I'm expecting the car to be totally completed by the end of the month and I'll endeavor to include lots of pictures and experiences as I learn all about the way she performs.
Also look out for The Retro Cars Magazine feature expected to be published in the April or May Issue.
Catch you all soon
Nix
- Attachments
-
- Note :- Filter socks are temporary
- 19286_579673958713799_211903479_n.jpg (112.61 KiB) Viewed 45553 times
-
- 525873_563812306966631_1805064363_n.jpg (60 KiB) Viewed 45553 times
-
- 602990_579672638713931_1893512733_n.jpg (105.31 KiB) Viewed 45553 times
-
- Webcon DCOE twin spring linkage modified to work on IDF's (note how it pushes on the lead carb)
- 734257_579670955380766_1681339775_n.jpg (131.74 KiB) Viewed 45553 times
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
Why not move the battery to the boot Nix?
G
G
Guy Croft, owner
-
- Posts: 317
- Joined: August 8th, 2011, 1:04 pm
- Location: Finland
- Contact:
Re: Guy Croft Lada Riva Twin Cam replica
^^ I was going to ask the same but then I thought it wouldn't be like Lotus Lada. It clearly had battery in original location. Of course it's better in the trunk, but what works, works.
This Lada is far better than than OE Lotus one for sure Nix! Car like this definately needs a proper roll gage, LSD an all other "must-have"-equipment...
This Lada is far better than than OE Lotus one for sure Nix! Car like this definately needs a proper roll gage, LSD an all other "must-have"-equipment...
GC_25
Re: Guy Croft Lada Riva Twin Cam replica
It's a fair comment. I didn't initially think that I'd need to move it but as you can see its very close to number 1 primary, I could fit a smaller battery but I'm sure it would still come close to melting. However that aside I'm going to move it anyway as I need to use the space for the new induction system. I'm planning on putting a large duct in the offside front valance and routing the new feed through the inner wing under where the battery tray (used to) sit and then fitting a cold air feed clyndrical filter in that space.
Guy :- I need to know what size ducting to use upto the airbox? theres lots of options on the market most of them are 3 inch but most manufacturers only recomend this size for engines 1600cc's or below I've noticed that on Miro's engine he's used what looks like that size, Is that correct? I thought It should be 4 inch.
Nix
Guy :- I need to know what size ducting to use upto the airbox? theres lots of options on the market most of them are 3 inch but most manufacturers only recomend this size for engines 1600cc's or below I've noticed that on Miro's engine he's used what looks like that size, Is that correct? I thought It should be 4 inch.
Nix
Who is online
Users browsing this forum: No registered users and 14 guests