hi Flavio,
Some pictures of your modifications would be interesting.
regards
Tom
A112 head porting
-
- Posts: 333
- Joined: July 28th, 2010, 3:09 pm
- Location: Leiden, The Netherlands
- Contact:
Re: A112 head porting
GC_29
Re: A112 head porting
Hy Tom.
Ok, I'll try to take some pics. I'm not a good photographer.
I'll try to do the best.
Flavio
Ok, I'll try to take some pics. I'm not a good photographer.
I'll try to do the best.
Flavio
Re: A112 head porting
Hy,
these are the latest photos of the head, cahamber and inlet side. poor quality, sorry.
This engine it's a 982 ( 965 enlarged ) engine just to try the modifications in the head. I also machine down the flywell ( 0.5 Kg Lighter ) and fit a better camshaft ( I'll tell you the degreees ) and feeded by a twin choke abarth carburettor and a 4 into 1 with sportier exaust.
In the future i'm thinking to build a better engine, 1050 cc and abarth head with bigger valves. I'll keep you informed.
Regard's
Flavio
these are the latest photos of the head, cahamber and inlet side. poor quality, sorry.
This engine it's a 982 ( 965 enlarged ) engine just to try the modifications in the head. I also machine down the flywell ( 0.5 Kg Lighter ) and fit a better camshaft ( I'll tell you the degreees ) and feeded by a twin choke abarth carburettor and a 4 into 1 with sportier exaust.
In the future i'm thinking to build a better engine, 1050 cc and abarth head with bigger valves. I'll keep you informed.
Regard's
Flavio
- Attachments
-
- View from the chamber, try to make the smoothes SSR I can...
- 29092012418C.jpg (23.09 KiB) Viewed 4720 times
-
- View from Inlet side, port open as big as possible and the runners enlarged in the front side , try to feed more air to the outer valves ( 1 & 4 )
- 29092012421C.jpg (20.16 KiB) Viewed 4720 times
Who is online
Users browsing this forum: No registered users and 1 guest