Gooday all,
Project number 2 is underway.
i have an 1756cc engine (10:1) standard header(bigger bore one) 2" straight thru exhaust, 43.5mm inlet valves, flowed head running twin Weber 45's, 36mm chokes, on short straight shot manifold. Longish ram tubes with ITG style filtration.
Ive decided to fit a set of Abarth 068 cams ive had sitting around for years....Can anyone help with setup of cams, and suggest suitable jetting for the 45's?
Any help would be appreciated...and would save me a lot of time!
Any guestimates on HP?
Thanks.
Fiat TC 1800, Abarth 068 cams, jetting please
-
- Posts: 60
- Joined: September 4th, 2006, 2:09 am
- Location: Pafos Cyprus
- Contact:
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
-
- Posts: 60
- Joined: September 4th, 2006, 2:09 am
- Location: Pafos Cyprus
- Contact:
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Who is online
Users browsing this forum: No registered users and 12 guests