Inlet Manifold

Competition engines and ancillaries - general discussion
Post Reply
Westfield
Posts: 42
Joined: July 14th, 2006, 11:41 pm
Location: Dublin Ireland
Contact:

Inlet Manifold

Post by Westfield »

Hi Guy

Would you have or could you advise me on where I would get a Inlet Manifold for a single Weber 40 DCNF carb to suit a Tipo 1400?. I have tryed many places inculding Chadil but to no avail.

Gary
Thank you
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Post by Guy Croft »

Truth is if you found one like the one I modified last you'd probably be shocked by the casting quality anyway! I was..

I would not try to find one. I would use the std one, cut off the old carb flange and weld a new one for the DCNF, get it fettled by yours truly.

OK?

GC
Westfield
Posts: 42
Joined: July 14th, 2006, 11:41 pm
Location: Dublin Ireland
Contact:

Post by Westfield »

Guy Croft wrote:Truth is if you found one like the one I modified last you'd probably be shocked by the casting quality anyway! I was..

I would not try to find one. I would use the std one, cut off the old carb flange and weld a new one for the DCNF, get it fettled by yours truly.

OK?

GC
Guy

I could probely get a std one all right but where would i get the DCNF flange? Could you do the job for me, keeping in mind the regs i have to follow?

Gary
Thank you
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Post by Guy Croft »

No, I have to avoid specials due to time constraints these days but any machine shop could make that from alloy patterned off the carb flange.
Maybe there is a site member who has that capability.

GC
benlilly
Posts: 52
Joined: July 21st, 2006, 10:47 am
Location: Stroud, Gloucestershire
Contact:

Post by benlilly »

I'm sure Bogg Brothers could do the mod for you. I have heard lots of good things about their work.
http://www.boggbros.co.uk/contact.html

thank you,
Ben
Westfield
Posts: 42
Joined: July 14th, 2006, 11:41 pm
Location: Dublin Ireland
Contact:

Post by Westfield »

benlilly wrote:I'm sure Bogg Brothers could do the mod for you. I have heard lots of good things about their work.
http://www.boggbros.co.uk/contact.html

thank you,
Ben
Ben

Thank you will try them.

Gary
Thank you
Acki

Post by Acki »

In igermany you can get manifolds in the "alquanti" style, new 200 Euro.
Westfield
Posts: 42
Joined: July 14th, 2006, 11:41 pm
Location: Dublin Ireland
Contact:

Post by Westfield »

Acki wrote:In igermany you can get manifolds in the "alquanti" style, new 200 Euro.
Hi Acki

Do you have a web address please?

Gary
Thank you
Acki

Post by Acki »

http://www.ruppmann.com/

But the site is offline. Write Claus an email!
claus@ruppmann.com

Give him regards from me (Martin Ackermann) :)

/edit: He has another site online: http://www.crengineering.de
Westfield
Posts: 42
Joined: July 14th, 2006, 11:41 pm
Location: Dublin Ireland
Contact:

Post by Westfield »

Acki wrote:http://www.ruppmann.com/

But the site is offline. Write Claus an email!
claus@ruppmann.com

Give him regards from me (Martin Ackermann) :)

/edit: He has another site online: http://www.crengineering.de
Thanks Martin
Thank you
Acki

Post by Acki »

Here a picture of the manifold:
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 35 guests