Morris Minor part 4

Post pics of your car in here
Post Reply
Wal
Posts: 19
Joined: July 2nd, 2006, 7:22 pm
Location: Denham, Bucks, UK
Contact:

Morris Minor part 4

Post by Wal » October 21st, 2017, 3:52 pm

Under the bonnet of the car reveals the full Guy Croft engine on twin 45s.
Image
Image

One unique feature is my own custom built 50mm stainless 4-2-2 system with Magnaflow main box and twin Scorpion back boxes. A rather rough and ready exhaust system but twin pipes out the back is a must and worth the small sacrifice in power.

Couple exhaust of pictures below:
Image
Image

I know it’s not pretty but it does the job. Part of the reason I used the 50mm tubing was because I knew I couldn’t make it quite right so compensated by using the biggest diameter tubing I could accommodate.

Soon it will be all of the above but in Volumex version, which will require a proper exhaust being made for it. The planned result brings to mind the sticker I once saw on the back of a Bugatti Veyron “Yes I Can”. Mine will be “Yes I Just Did”

What happens with this engine? Well it gets transplanted into my other Morris Minor that currently only has a standard Twin Cam in.

Hopefully you have enjoyed the brief trip round my car and it was worth the read. For me it is simply the best.

Regards,
Wal

Guy Croft
Site Admin
Posts: 5036
Joined: June 18th, 2006, 9:31 am
Location: Lincoln, UK
Contact:

Re: Morris Minor part 4

Post by Guy Croft » October 21st, 2017, 5:20 pm

Hi Steve and your super dad (who also has a Morris-Minor TC!)

marvellous to see you both at GCRE this week and thank you very much for your respected new order for a GC VX 2 liter unit.

Loved the posts and the new Rat Look!! it's my fav tbh (hope that's not too modern for GC!)

Do tell the story of the rolling-road tests at Northants M/Sport if you get time. It really made me smile.

Thanks again for sharing the fun here,

very sincerely,

G
Guy Croft, owner

Spider 1969
Posts: 135
Joined: September 22nd, 2013, 7:21 pm
Contact:

Re: Morris Minor part 4

Post by Spider 1969 » October 24th, 2017, 9:38 pm

Nice one; love to see more on how the engine and transmission have been installed.
Keep it up.

Best regards,
Charles
GC_26

Will01
Posts: 581
Joined: November 26th, 2012, 3:50 pm
Location: Dumfries, Scotland
Contact:

Re: Morris Minor part 4

Post by Will01 » November 21st, 2017, 10:36 pm

I love these mad conversions. Rocket ship.
We need to see more details and pictures.
Any videos floating about?
GC_21

Wal
Posts: 19
Joined: July 2nd, 2006, 7:22 pm
Location: Denham, Bucks, UK
Contact:

Re: Morris Minor part 4

Post by Wal » February 9th, 2019, 7:36 pm

Dear all,
got my GC Volumex engine and been taking out the current engine, to be re-installed in my other Morris right after this one is sorted.

Always knew that this was going to be a super tight fit and yes the carb does intrude into the wheel well. But I'm going to box it in and draw the air from the engine side.

But here it is - the first trial fit of the Volumex in the engine bay and yes it does fit (mostly) and it looks sooooooo good in there.

Engine has come back out as the cut out for the carb is a bit short (as you can see from the last picture) so that'll be fixed, and yes it is untidy so there is some tidying up to do.

So here's a few pictures of the trial fit - I came back out after I took the pictures so I can work on some of the items mentioned.

Also decided that when I do the final install to put the engine and gearbox in attached due to clearance. So dropped out the gearbox today so I can attach it all together.

Regards,
Wal
Trial install 1.jpg
Trial install 1.jpg (342.52 KiB) Viewed 90 times
Trial install 2.jpg
Trial install 2.jpg (336.96 KiB) Viewed 90 times
Trial install 3.jpg
Trial install 3.jpg (348.79 KiB) Viewed 90 times
Trial install 4.jpg
Trial install 4.jpg (256.77 KiB) Viewed 90 times

Spider 1969
Posts: 135
Joined: September 22nd, 2013, 7:21 pm
Contact:

Re: Morris Minor part 4

Post by Spider 1969 » February 14th, 2019, 7:45 pm

Nice, enjoy the build and keep us posted Wal!
GC_26

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests