Buiding a 131 Abarth Replica STEP -BY-STEP

Post pics of your car in here
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Hallo all,

An opportunity cropped up to supplement the "never ending story" of building my 131 Abarth with a project being developed from the beginning to end.

Some time ago, by a set of unusual circumstances our little stable was supplemented by a 1600 131 coupe, of 1976 !

We had no plans to build another 131 Abarth replica and the car was just sitting abandoned in a garage, waiting for real fan who would appreciate this little beauty.

Sometime this summer a friend turned to us to help him building a 131 Abarth replica. He did not know of what was sitting in our garage just waiting for him. When he saw it he immediately fell in love with it.

Now wonder , it really is a beauty .....
new 1 .jpg
new 1 .jpg (55.09 KiB) Viewed 30232 times
new 2 .jpg
new 2 .jpg (47.08 KiB) Viewed 30232 times
Now the project is under way ... and we have this rare opportunity to share its development from the very beginning ...

The car is to be ultimately a replica gr 4 but will be developed in stages.

Stage 1 - body work ( body enforcement, roll cage, body panels, bonnets, dashboard, interior )
Initially the car will be on standard rigid rear axis and stock 131 hubs with upgraded brakes springs, and shocks

Stage 2 - engine ( building a rally DOHC 2.0 engine of hopefully 160-180 bhp to GC stage II rally specs

Stage 3 - installation of full gr 4 replica suspension from Rally Sports Development and original Abarth diff.

Stages 1 and 2 are planned to be completed for 2015 season , and stage 3 is currently planned to be completed for 2016 season.

Next : body and chassis inspection for rust.

Miro
Last edited by miro-1980 on October 17th, 2014, 12:39 am, edited 1 time in total.
www.Fiat-abarth-rally.com
GC_93
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Step one : What do we got ? (body and chassis inspection for rust.)


Initial body inspection indicated it was in a very good shape for a car which has been on the road for 38 years:
side.jpg
side.jpg (52.48 KiB) Viewed 30231 times
engine bay .jpg
engine bay .jpg (70.23 KiB) Viewed 30231 times
boot.jpg
boot.jpg (47.5 KiB) Viewed 30231 times
interior 1 (10).jpg
interior 1 (10).jpg (74.92 KiB) Viewed 30231 times
imterior 2.jpg
imterior 2.jpg (159.96 KiB) Viewed 30231 times
instrument cluster.jpg
instrument cluster.jpg (38.66 KiB) Viewed 30231 times

The shape of the car was so goof we could not really believe it, so we kept digging.

Document analysis seemed to confirm the mileage on the car odometer was actual and accurate !!!!!!.

The car was driven to Poland on its own. it had a current MOT. Miracle or what ?

Now this was becoming too good to be true so we kept digging further:
left front under .jpg
left front under .jpg (52.58 KiB) Viewed 30231 times
rear left susp fragment .jpg
rear left susp fragment .jpg (50.66 KiB) Viewed 30231 times

engine bay under BMC.jpg
engine bay under BMC.jpg (44.5 KiB) Viewed 30231 times

left  front engine bay 2 .jpg
left front engine bay 2 .jpg (46.11 KiB) Viewed 30231 times
engine bay  right .jpg
engine bay right .jpg (63.33 KiB) Viewed 30231 times
rear right susp fragment .jpg
rear right susp fragment .jpg (58.01 KiB) Viewed 30231 times
under 1.jpg
under 1.jpg (36.44 KiB) Viewed 30231 times
under 3.jpg
under 3.jpg (74.24 KiB) Viewed 30225 times

What we saw made us a very happy bunch , but still could not believe - so we kept digging as the car was prepared for reinforcement and welding in the roll cage....

( more is coming ... very soon )


Miro
Last edited by miro-1980 on October 17th, 2014, 12:49 pm, edited 3 times in total.
www.Fiat-abarth-rally.com
GC_93
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Preparing the car for chassis weld strengthening- the car must be literally taken apart.

This gave us an excellent opportunity to find the real rust weak spots ...

Well, this is what we found :
pre roll cage inspection (1).JPG
pre roll cage inspection (1).JPG (50.13 KiB) Viewed 30231 times
pre roll cage inspection (2).JPG
pre roll cage inspection (2).JPG (71.01 KiB) Viewed 30231 times
pre roll cage inspection (3).JPG
pre roll cage inspection (3).JPG (66.86 KiB) Viewed 30231 times
pre roll cage inspection (4).JPG
pre roll cage inspection (4).JPG (64.23 KiB) Viewed 30231 times
pre roll cage inspection (5).JPG
pre roll cage inspection (5).JPG (45.67 KiB) Viewed 30231 times
pre roll cage inspection (7).JPG
pre roll cage inspection (7).JPG (77.04 KiB) Viewed 30231 times
pre roll cage inspection (8).JPG
pre roll cage inspection (8).JPG (54.66 KiB) Viewed 30231 times
pre roll cage inspection (9).JPG
pre roll cage inspection (9).JPG (45.7 KiB) Viewed 30231 times
pre roll cage inspection (10).JPG
pre roll cage inspection (10).JPG (86.49 KiB) Viewed 30231 times
pre roll cage inspection (11).JPG
pre roll cage inspection (11).JPG (84.3 KiB) Viewed 30231 times
pre roll cage inspection (12).JPG
pre roll cage inspection (12).JPG (86.02 KiB) Viewed 30231 times
pre roll cage inspection (13).JPG
pre roll cage inspection (13).JPG (75.05 KiB) Viewed 30231 times
pre roll cage inspection (14).JPG
pre roll cage inspection (14).JPG (57.79 KiB) Viewed 30231 times
pre roll cage inspection (15).JPG
pre roll cage inspection (15).JPG (66.57 KiB) Viewed 30231 times
pre roll cage inspection (16).JPG
pre roll cage inspection (16).JPG (56.76 KiB) Viewed 30231 times
We have found no rust problems of the structural elements in the car. Minor rust problems with the body panels are of no issue as all the wings and bonnets will be replaced with light weight fiberglass elements. The doors as as new , too. It really looks like a miracle or does it ?

Maybe all those that say that fiats of the 70's and 80's were just a rusty pieces of junk the moment they left the factory, were wrong. Well, this car proves that if cared for , Fiat 131 can last forever and have virtually no rust issues.

With this conclusion the car went to specialized garage where they will strengthen the chassis for sports and install a FIA certified roll cage.
on its way (24).JPG
on its way (24).JPG (92.38 KiB) Viewed 30231 times
The car has already been registered as "historic vehicle" has yellow plates and has undergone the last MOT in its life. The rest will be technical inspections conducted by stewards before it is allowed to start in a rally. We hope its first rally start will take place in April 2015.

Next: cage installation and body strengthening in about two weeks . In the mean time please enjoy these lovely pictures of a healthy 131 coupe body and chassis. It really is a rarity, nowadays.


Miro
www.Fiat-abarth-rally.com
GC_93
Nobby
Posts: 87
Joined: August 24th, 2010, 11:58 am
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by Nobby »

Looks excellent. Didn't know they came in this colour.
Chris Burgess
GC 01
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Latest update

We are waiting for the car to come back from the welder , but in the meantime we have key Abarth suspension parts for it:
parts 3.jpg
parts 3.jpg (86.53 KiB) Viewed 30174 times
parts 2.jpg
parts 2.jpg (46.64 KiB) Viewed 30174 times
parts 1.jpg
parts 1.jpg (14.15 KiB) Viewed 30174 times
It comes from a Stradale, but under the circumstances of a very short supply and great demand we were extremely lucky to get those. These are all homologated so the car will have fully historic Abarth independent suspension ( no re-manufactured parts).

More to come soon .

Miro

PS: other parts like ARB's for rear and front and rear struts are also here ( though not shown of the pictures) ...
www.Fiat-abarth-rally.com
GC_93
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Here is a small picture update.

As pictures say more than words , I will keep my comments to a bare minimum

The body is so fresh it is almost unbelievable !

This is a 1976 car !!! almost 40 years and the body and chassis is practically with no trace or any rust !!!


The cage was welded in. Most of chassis strengthening reinforcements are done.

The light panels and aluminum sheet doors are being fitted.

Miro

PS: the roll cage really is a masterpiece !
Attachments
R5178885.JPG
R5178885.JPG (31.12 KiB) Viewed 30149 times
R5178886.JPG
R5178886.JPG (55.01 KiB) Viewed 30149 times
R5178887.JPG
R5178887.JPG (78.98 KiB) Viewed 30149 times
R5178888.JPG
R5178888.JPG (42.09 KiB) Viewed 30149 times
R5178890.JPG
R5178890.JPG (67.16 KiB) Viewed 30149 times
R5178889.JPG
R5178889.JPG (60.83 KiB) Viewed 30149 times
R5178890.JPG
R5178890.JPG (67.16 KiB) Viewed 30149 times
R5178891.JPG
R5178891.JPG (65.21 KiB) Viewed 30149 times
R5178892.JPG
R5178892.JPG (63.55 KiB) Viewed 30149 times
R5178893.JPG
R5178893.JPG (72.47 KiB) Viewed 30149 times
R5178894.JPG
R5178894.JPG (60.55 KiB) Viewed 30149 times
R5178895.JPG
R5178895.JPG (70.86 KiB) Viewed 30149 times
R5178896.JPG
R5178896.JPG (60.62 KiB) Viewed 30149 times
R5178897.JPG
R5178897.JPG (51.8 KiB) Viewed 30149 times
R5178898.JPG
R5178898.JPG (56.49 KiB) Viewed 30149 times
R5178899.JPG
R5178899.JPG (41.83 KiB) Viewed 30149 times
R5178900.JPG
R5178900.JPG (60.89 KiB) Viewed 30149 times
www.Fiat-abarth-rally.com
GC_93
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Few parts just arrived ...
R5178901.JPG
R5178901.JPG (71.32 KiB) Viewed 30142 times
R5178903.JPG
R5178903.JPG (63.71 KiB) Viewed 30142 times
R5178904.JPG
R5178904.JPG (63.32 KiB) Viewed 30142 times
R5178905.JPG
R5178905.JPG (58.79 KiB) Viewed 30142 times

We are also planning proper set of camshafts... to match expected engine specs and characteristics ... We can either pick up one of many sets sitting of a wine shelf , or design one specifically for this engine. We are indeed lucky to have in-house expertise in designing camshafts as well as technical capability to make them. Guys that do it are all well over their 60-s , which means that the younger generation will be pretty much stuck with off the shelf ones.
R5178902.JPG
R5178902.JPG (125.33 KiB) Viewed 30142 times

Miro
www.Fiat-abarth-rally.com
GC_93
Will01
Posts: 590
Joined: November 26th, 2012, 3:50 pm
Location: Dumfries, Scotland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by Will01 »

Some nice shiny bits there
GC_21
FiatRally
Posts: 65
Joined: February 11th, 2013, 6:37 pm
Location: Cape Town. South Africa
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by FiatRally »

Hello Miro,

Please tell us what pistons are those that you are going to use.

The weight must be heavy with the shape of the dome?

Regards,

Ernst
GC_75
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Hi Ernst,

We are sort of working with what we got in our garage and garages of our friends.

I know the pistons are drop forged and US made, but have to find out who made them.
They are the high , but not as heavy as they look. In fact I will weight them to see how much they actually weigh.

Miro
www.Fiat-abarth-rally.com
GC_93
Will01
Posts: 590
Joined: November 26th, 2012, 3:50 pm
Location: Dumfries, Scotland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by Will01 »

This does look like a really nice build, i still can't quite believe how great condition the car is to start with.
Looking forward to following the build as you progress
GC_21
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Well,

This is really in unbelievable !!!

I gave seen so many pictures of 131 total rust piles being returned to life , but this one . It is truly amazing.

Its is like finding a jewel !

Thanks for your comments. I will keep updating this thread as things happen.

Should make a nice story with lots of pictures.

Rgds

Miro
www.Fiat-abarth-rally.com
GC_93
FiatRally
Posts: 65
Joined: February 11th, 2013, 6:37 pm
Location: Cape Town. South Africa
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by FiatRally »

Miro,

You are right, that car is a gem and it really needs to be built into a masterpiece!

Please if you can post pictures of the chassis strengthening that you do to a body like that. From front to back.

Also where all do you seem weld the chassis please.

I am so envious of your projects and hope to get all the cars that I am busy with to a standard close to what you are able to do.

All the best,

Ernst
GC_75
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Ernst,

I also envy the car owner
Now am only helping him to compete this project.

This car has in fact a funny history. I bought it for a friend whose client urgently needed 131 2dr for a 131 Abarth replica project.

When I saw the car I bought it , but by this time the client lost interest.

I think this client (whom I never met) did not trust my judgment and he decided to buy a 131 Racing in UK, which he could inspect locally.

So I was stuck with a car I did not need ... and nobody seemed to want it.

People new the car came from Sweden and may have feared that Swedish snow turned it into a pile of junk. ( They forgot that cars rus5t due to humidity and salt not snow. The Swedes never use salt to melt the snow, while salt is used ll over Europe causing the cars to rust, especially where it is dump during 3 out of 4 seasons of the year , like in UK)

Ultimately a local friend turned to me to help him build a 131 Abarth replica , and when he saw the car he put cash on the table.
Right I am helping him to build it ... The man who is actually doing all the work is my mechanic , who knows my 131 inside out and has extremely wide experience with competition car preparation ( engines, suspension, body) as well specialized knowledge of Fiats. He builds all cars as it each of them was for his own racing/rallying.

So the current owner guys is indeed a very lucky man ...

Rgds

Miro

PS: will ask for pictures of seem welding and body strengthening and post them, when I get them.
www.Fiat-abarth-rally.com
GC_93
miro-1980
Posts: 687
Joined: December 3rd, 2007, 3:40 pm
Location: Warsaw suburb , Poland
Contact:

Re: Buiding a 131 Abarth Replica STEP -BY-STEP

Post by miro-1980 »

Here is a curent body building picture update ...
131 abarth body (8).JPG
131 abarth body (8).JPG (72.86 KiB) Viewed 30671 times
131 abarth body (7).JPG
131 abarth body (7).JPG (63.04 KiB) Viewed 30671 times
131 abarth body (6).JPG
131 abarth body (6).JPG (82.12 KiB) Viewed 30671 times
131 abarth body (3).JPG
131 abarth body (3).JPG (88.17 KiB) Viewed 30671 times
131 abarth body (1).JPG
131 abarth body (1).JPG (107.65 KiB) Viewed 30671 times
131 abarth body .JPG
131 abarth body .JPG (52.66 KiB) Viewed 30671 times
With body reinforced , the cage welded in and the panels mounted it is going to paint shop soon..

Miro
www.Fiat-abarth-rally.com
GC_93
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests