Fiat 128 model '72 -Stage 1-

Post pics of your car in here
Post Reply
federico_878
Posts: 7
Joined: June 1st, 2011, 12:09 pm
Location: Argentina, Capital Federal

Fiat 128 model '72 -Stage 1-

Post by federico_878 »

Hello my name is Federico. I live in Buenos Aires, Argentina
I present my car is a Fiat 128 model '72.

Engine SOHC:
-1100 cc to 1400 cc.
-Tipo's crank stroke 67.4mm
-crankshaft has worked the benches.
-forged pistons, bore 82.5mm and volume 7cc.
-polished rods, lightened, keeping your weight evenly between the 4.
-cylinder head gasket sheet thickness of 0.6.
-cylinder head: * ducts worked
*worked Heaven
* worked valve seat
*valves are developing a new
* worked valve guides
-Fiat 128 camshaft IAVA 1300cc 102hp.
-Megasquirt 2 only work spark.
-Weber carburetor 32 mm to 40 mm, original broadcasters.
-steel flywheel weight was reduced from the original.
-gearbox Lancia (Fiat 1, Fiat Tipo, Motor type in a few words).
-clutch: original plate, disc brake pads 3 and fixed center

Front:
-adjustable arm ball
-elastomer bushings are developing.
-original roll-bar
-shock compression and worked in expancion
-will work in the spring, reducing the height.
-wheels 13" original Fiat Uno Turbo
-undefined tires.
-disc brake and calipers Fiat Palio ventilated

Rear:
-is being re-designed

Interior:
-instrumental Fiat 128 IAVA 1100cc
-"torpedo" in the process of restoration
-steering wheel Renault R19 RTI Coupe (redesigned, obviously)
-seats, waiting for a surprise.

P.S.1: I apologize for my English is not very good. If you need to modify the post, no problems.
P.S.2:The photos go up tomorrow, I have them on this pc.
federico_878
Posts: 7
Joined: June 1st, 2011, 12:09 pm
Location: Argentina, Capital Federal

Re: Fiat 128 model '72 -Stage 1-

Post by federico_878 »

Hi, I brought some pictures of the car and engine parts.

Photos of the car when I buy it:
Image
Image

After changing some parts:
Image
Image

Reinforcement was performed on the body:
Image

In the workshop of the painter
Image
Image

Work can be seen on the cranks:
Image

Engine 1100 cc to 1400 cc:
Image

Forged piston:
Image

Reform to the command switch:
Image

Sorry for my English not very good. And soon I will be counting as the next stage is made.
Should they have any questions ask me.

Byee
federico_878
Posts: 7
Joined: June 1st, 2011, 12:09 pm
Location: Argentina, Capital Federal

Re: Fiat 128 model '72 -Stage 1-

Post by federico_878 »

any suggestions?
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Fiat 128 model '72 -Stage 1-

Post by Guy Croft »

Sorry Federico

been that busy lately hardly been able to write on the site at all. Doing my best.

Will look in on this one when I get a moment slightly longer than 2 minutes without the phone ringing.

In the meantime !! MEMBERS!! can we have a bit of enthusiasm for this super project from a friend so far away?

Ta

G
Brit01
Posts: 825
Joined: June 28th, 2011, 4:54 pm
Location: Uruguay

Re: Fiat 128 model '72 -Stage 1-

Post by Brit01 »

I'm probably your closest neighbour being just across the rio de la plata (Pocitos-MVD).

You are taking on a big project there federico_878 by the looks of it. Total restoration.
Can you find parts easily in Buenos Aires?

From 1100 to 1400 is a dramatic increase. Are you working on this yourself or have technical assistance?

Regards

Chris
Last edited by Brit01 on January 26th, 2012, 3:48 pm, edited 1 time in total.
NineOneSix
Posts: 13
Joined: January 23rd, 2012, 3:49 pm
Location: Hertfordshire
Contact:

Re: Fiat 128 model '72 -Stage 1-

Post by NineOneSix »

Quite a project your taking on there! I love the old Fiats. Good luck with the project!

Oh and your English is fine, I would not worry to much.
federico_878
Posts: 7
Joined: June 1st, 2011, 12:09 pm
Location: Argentina, Capital Federal

Re: Fiat 128 model '72 -Stage 1-

Post by federico_878 »

Guy Croft wrote:Sorry Federico

been that busy lately hardly been able to write on the site at all. Doing my best.

Will look in on this one when I get a moment slightly longer than 2 minutes without the phone ringing.

In the meantime !! MEMBERS!! can we have a bit of enthusiasm for this super project from a friend so far away?

Ta

G
Thanks Guy.
Brit01 wrote:I'm probably your closest neighbour being just across the rio de la plata (Pocitos-MVD).

You are taking on a big project there federico_878 by the looks of it. Total restoration.
Can you find parts easily in Buenos Aires?

From 1100 to 1400 is a dramatic increase. Are you working on this yourself or have technical assistance?

Regards

Chris
Is true we are close.
With regard to motor much in the market. Parts for the body there are varied quality and poor quality.
Don't understand what the "technical assistance"?

NineOneSix wrote:Quite a project your taking on there! I love the old Fiats. Good luck with the project!

Oh and your English is fine, I would not worry to much.
Thanks. This project takes me a long time...
federico_878
Posts: 7
Joined: June 1st, 2011, 12:09 pm
Location: Argentina, Capital Federal

Re: Fiat 128 model '72 -Stage 1-

Post by federico_878 »

News:

Buy Fiat Uno Turbo wheels 13 "x 5.5".
Some pics

Image
Image
Image

many pictures up tomorrow.
Brit01
Posts: 825
Joined: June 28th, 2011, 4:54 pm
Location: Uruguay

Re: Fiat 128 model '72 -Stage 1-

Post by Brit01 »

Is true we are close.
With regard to motor much in the market. Parts for the body there are varied quality and poor quality.
Don't understand what the "technical assistance"?
I can relate to you about the poor quality of products here in South America. I try to buy smaller/critical parts from Europe if I can.

What I meant about "technical assistance" was that if you had help or are working on the car alone? Re-boring etc.

Regards,

Chris
federico_878
Posts: 7
Joined: June 1st, 2011, 12:09 pm
Location: Argentina, Capital Federal

Re: Fiat 128 model '72 -Stage 1-

Post by federico_878 »

Chris:

work alone in my car, sometimes I ask for help to colleagues / friends, if only I can not do.

Regards.
podd37
Posts: 6
Joined: September 13th, 2006, 1:41 pm
Location: Ireland
Contact:

Re: Fiat 128 model '72 -Stage 1-

Post by podd37 »

Great work...kep us all informed
Brit01
Posts: 825
Joined: June 28th, 2011, 4:54 pm
Location: Uruguay

Re: Fiat 128 model '72 -Stage 1-

Post by Brit01 »

Any updates Federico?

Been a while since we've heard anything new about your 128.
federico_878
Posts: 7
Joined: June 1st, 2011, 12:09 pm
Location: Argentina, Capital Federal

Re: Fiat 128 model '72 -Stage 1-

Post by federico_878 »

I get some time today and tell them the news
Post Reply

Who is online

Users browsing this forum: No registered users and 49 guests