Alfa 155 Q4

Post pics of your car in here
Post Reply
Wolf66
Posts: 9
Joined: June 7th, 2007, 8:25 am
Location: Velenje, Slovenia (A)
Contact:

Alfa 155 Q4

Post by Wolf66 »

Hi to all.

This is my car. I invested a lot of my free time in it,
as i done all the modifications by myself.


Alfa 155 Q4

CPS forged pistons
Colombo&Bariani stret max cams
Ported and polished head
Polished and balanced conrods
lightened flywheel balanced with crankshaft
Custom made inlet and exhaust manifold
Siemens DEKA 650 cc injectors
Walbro high flow 255l fuel pump
12mm head bolts
Spesso group A headgasket
Garrett GT35R
3" freeflow exhaust
Front mounted intercooler
Eibach springs
Brembo 308mm discs and 4 pot calipers
Innovative wideband lambda and datalogger
3 bar MAP sensor
Custom made chip


370 hp@1.3 bar boost
~500 hp@2 bar boost
Acceleration 100-200 km/h 7.8 s


Acceleration movie 30-200 km/h




Image


Image


Image


Image


Image


Image


Image


Image


This is rolling road graph at 1.3 bar boost:


Image


This is acceleration graph from datalogger at 1.85 bar boost, and datalogger dials:


Image


Image
Last edited by Wolf66 on August 28th, 2007, 6:50 am, edited 1 time in total.
Testament
Posts: 101
Joined: June 22nd, 2006, 7:47 pm
Location: Taupo, New Zealand
Contact:

Post by Testament »

Wow thats awesome! total sleeper, no one would even know from outside that it was a total rocket.
madmurdoch
Posts: 16
Joined: April 27th, 2007, 7:08 pm
Location: Isle of Wight
Contact:

Post by madmurdoch »

Very Very Impresive,
Is the Alfa reliable running that kind of Bhp?
Wolf66
Posts: 9
Joined: June 7th, 2007, 8:25 am
Location: Velenje, Slovenia (A)
Contact:

Post by Wolf66 »

madmurdoch wrote:Very Very Impresive,
Is the Alfa reliable running that kind of Bhp?
I'm currently changing the turbo (some old big holset) for Garrett dual ball bearing GT35R. Holset reached full boost at 6400 RPM. When i raised ignition cut to 8000 RPM in order to get good performance crankshaft bearings failed.

Before that engine ran without any problems for 10 000 kms with ignition cut set to 7500 RPM.

GT35R will reach full boost at around 4800 RPM so i can set ignition
cut back to 7500 RPM.
Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests