My new hand-made turbo exhaust manifold

Road-race engines and ancillaries - general discussion
Post Reply
cantfindausername
Posts: 306
Joined: July 19th, 2006, 6:07 pm
Location: Crawley, West Sussex
Contact:

My new hand-made turbo exhaust manifold

Post by cantfindausername »

Opinions welcome... obviously

Image
Image
Image
Image
Image
Image

Ant
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Post by Guy Croft »

Looks handsome to me Ant!

GC
cantfindausername
Posts: 306
Joined: July 19th, 2006, 6:07 pm
Location: Crawley, West Sussex
Contact:

Post by cantfindausername »

yes I'm really pleased with it.

I'm thinking of getting a new flange on it though as mine is a 9stud head, and this was fashioned on the earlier 6 stud heads. I also want to get some bracing put through it just to be safe.

All still a long way off though, but those are my plans.... I think

Ant
SteveNZ

Post by SteveNZ »

Is this for your Toyota? It would appear you have dropped the CT26 for some kind of Garrett turbo and a 38mm gate. What do you have planned?
cantfindausername
Posts: 306
Joined: July 19th, 2006, 6:07 pm
Location: Crawley, West Sussex
Contact:

Post by cantfindausername »

Indeed it is.

I will be running the stock in & ex. manifolds, and the stock CT26 while I run in the engine, but I will then be swapping them out for this manifold, a big side feed inlet manifold and 75mm throttle body, and a Garrett GT35R turbo!

Should be quite impressive once its all fuelled/mapped etc. Still seems like such a long way off though at the moment.
Evodelta

Post by Evodelta »

I like the look of that Ant, looks very well made: A split in the mounting flange for expansion and a proper pyramid collector inside too. Nice!
Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests