All ? about 43.5 intake valves in Fiat TC.

Road-race engines and ancillaries - general discussion
Guy Croft
Site Admin
Posts: 5004
Joined: Sun Jun 18, 2006 9:31 am
Location: Lincoln, UK
Contact:

Re: All ? about 43.5 intake valves in Fiat TC.

Post by Guy Croft » Fri Jun 10, 2016 6:21 pm

this is what bothers me Piotr:

"Almost every site about Fiat TC site has a thread about "Big intake valves", "Abarth valves" etc. You must know that some of folks on there sites shares with other a not fully correct info about it, eg. I read on one of Fiat lovers site that you don't need change a smaller valve seats from 41.7mm valves to do this conversion - totally bullshit, I will write about it later..."

This forum is rather unusual in that it is for portrayal of fact not hearsay.

I have never written this before, and never had to. I know the nonsense written on other forums and long-since stopped reading them. I suggest you do the same. And don't use words like bullshit here please, it is not that kind of forum. This site is read by top professionals in the motor industry all over the world.


GC
Guy Croft, owner

Piotrek125p
Posts: 209
Joined: Sun Dec 02, 2012 3:45 pm
Location: Lodz,Poland
Contact:

Re: All ? about 43.5 intake valves in Fiat TC.

Post by Piotrek125p » Fri Jun 10, 2016 6:29 pm

According to this nonsense and mess from other sites I wanted to make heare, on the best TC site a thread, where any GC site member can easily get full information about this one of the most popular (in my opinion) operation to make an extra power in Fiat TC engine. Just because in my opinion this site is the best about this engines I decided to make as good as I can thread about this thing.

If I done something wrong, I am very sorry.
GC approved

Guy Croft
Site Admin
Posts: 5004
Joined: Sun Jun 18, 2006 9:31 am
Location: Lincoln, UK
Contact:

Re: All ? about 43.5 intake valves in Fiat TC.

Post by Guy Croft » Fri Jun 10, 2016 6:51 pm

it's OK Piotr.

G
Guy Croft, owner

Piotrek125p
Posts: 209
Joined: Sun Dec 02, 2012 3:45 pm
Location: Lodz,Poland
Contact:

Re: All ? about 43.5 intake valves in Fiat TC.

Post by Piotrek125p » Tue Jun 14, 2016 5:50 pm

Today I found in my archives a nice photo made by GC about top grind.
Back grind.JPG
Back grind.JPG (54.3 KiB) Viewed 2880 times
GC approved

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest