Need Camchafts for my 2,0 16v engine.used in my X1/9
Posted: March 2nd, 2013, 2:58 pm
Hi looking for camchafts for my Fiat X1/9 Abarth Replica . The set up is DTA e48 ECU about 11-1 in compression 40mm throttlebodies ,( will fit 45 soon)4 to 1 headers comming soon, The head is slightly modified after MR, Croft book,
If i had good std cams MR ,Croft had the possibilety to grind camms for mee . But i have not.
My brand new german bilett camms givs good torque ,but dont suit my needs, They are Intake280 deg.10,9 lift, Lift at TDC 1,6mm Outlet 256 dedeg 9,6 in lift , Lift at TDC 1,3mm.
Dont know if these specks are with or wihtout clarance. But feels almost the same as OE cams, Gives a little more torque , After my meening to little duration.
The cams i choose must also bee lowcost , and i need somthing like medium race , Or at least so i can have a spinn on the roads too.Any good hints out there ? Regards Ove Thorkildsen Oslo Norway-
othorkild@c2i.net
If i had good std cams MR ,Croft had the possibilety to grind camms for mee . But i have not.
My brand new german bilett camms givs good torque ,but dont suit my needs, They are Intake280 deg.10,9 lift, Lift at TDC 1,6mm Outlet 256 dedeg 9,6 in lift , Lift at TDC 1,3mm.
Dont know if these specks are with or wihtout clarance. But feels almost the same as OE cams, Gives a little more torque , After my meening to little duration.
The cams i choose must also bee lowcost , and i need somthing like medium race , Or at least so i can have a spinn on the roads too.Any good hints out there ? Regards Ove Thorkildsen Oslo Norway-
othorkild@c2i.net