MSD IGNITION

Road-race engines and ancillaries - general discussion
Post Reply
nabihelosta
Posts: 94
Joined: December 14th, 2010, 5:37 pm
Location: Lebanon

Re: MSD IGNITION

Post by nabihelosta »

An A++ NOS setup! Can't stop WOWing at it!!

Any more details?? Jet size, fuel pressure, controller (manual or electronic..)

Amazing!
HORSEPOWERunlimited
n2oxide
Posts: 57
Joined: March 1st, 2011, 7:58 pm
Location: London, UK
Contact:

Re: MSD IGNITION

Post by n2oxide »

Just a 70bhp wet shot with a 4 degree retard on full throttle. Nothing complicated, but then again, enough run a Sunbeam Lotus to 12.5 seconds at 115mph.

Perry
GC_86
bernie
Posts: 24
Joined: June 25th, 2006, 11:49 am
Location: Southampton UK
Contact:

Re: MSD IGNITION

Post by bernie »

Just fitted the 6AL unit but the rev counter does not work.
Manual says I need the PN8910.
Any thoughts?
Book 28
Too many 124
n2oxide
Posts: 57
Joined: March 1st, 2011, 7:58 pm
Location: London, UK
Contact:

Re: MSD IGNITION

Post by n2oxide »

That's because the MSD is sucking the life out of the earth on the car. Just shows how bad the wiring on older cars really is.
Yes the RPM counters lose reading. That box will sort it. Think they are about £40.
GC_86
bernie
Posts: 24
Joined: June 25th, 2006, 11:49 am
Location: Southampton UK
Contact:

Re: MSD IGNITION

Post by bernie »

Ordered the PN8910

First impressions,
A lot fatter spark
Starting is easier with less choke
Cold running is more reliable

Normal running, no noticeable difference although I have not opened the plugs up yet.

Not checked MPG yet

As the ignition was always the weakest link in the 1960's engine chain, so far I'm pleased with the purchase and would recommend it

Bernie
Book 28
Too many 124
FiatRally
Posts: 65
Joined: February 11th, 2013, 6:37 pm
Location: Cape Town. South Africa
Contact:

Re: MSD IGNITION

Post by FiatRally »

Hallo Gentlemen,

I have read all 10 pages of this thread. Wow, I love this thread!!

There are plenty of these units available in South Africa at very cheap prices! And that set the lights on!!

There are 6L and 6AL units available. How do I know if its the real thing and not a copy from the East?

I can get a 6AL that is nearly new for R 2 000.00 and 6A for around R 1 200.00.

I attached a photo of a unit that I am looking at. It is limited at 7000Rpm and comes off a Mustang V8.

Can it be changed back for a 4 cylinder engine?

I think most people looking at buying units at good prices are very scared of buying knock offs!!

Thank you ALL for a magic thread!

Kind Regards,

Ernst Conradie
Attachments
MSD 6AL
MSD 6AL
$(KGrHqV,!o0F!HcnjwrFBQMNiog7!g~~48_20.jpg (122.44 KiB) Viewed 9508 times
GC_75
n2oxide
Posts: 57
Joined: March 1st, 2011, 7:58 pm
Location: London, UK
Contact:

Re: MSD IGNITION

Post by n2oxide »

Hi Ernst,

Don't waste your time with a 6L - Stick to the 6AL with the RPM limiter. How do you know it's real ?
Well, not difficult to me, but maybe for you. Smell it, it should smell 'electronic' and no smell of factory oil. Open the back up; inside should be ALL SEALED with epoxy over most of the components.

You can buy the limiter chips for no money, they just pull in and out.
To change to 4 cylinder, you unscrew that little black cap on the side and snip the two wires....easy.

Perry
GC_86
FiatRally
Posts: 65
Joined: February 11th, 2013, 6:37 pm
Location: Cape Town. South Africa
Contact:

Re: MSD IGNITION

Post by FiatRally »

Halo Gentlemen,

Perry, you're a star!!! Thank you very much.

I will contact the seller tomorrow and go with tools included. If I cannot open it, I don't buy it!!!

We came second in class on Saturday with the Alfa GTV 2.0 and now I must get my Fiat finished.

I have 3 weeks, that's all!

Thank you for a magic thread and thanks Guy for this forum!

Regards from Sunny Cape Town.

Ernst
GC_75
bernie
Posts: 24
Joined: June 25th, 2006, 11:49 am
Location: Southampton UK
Contact:

Re: MSD IGNITION

Post by bernie »

Update:
80 mile trip to AutoItalia Brooklands, 5 laps of the Mercedes track, 2 hill runs and 80 mile back home.
Never missed a beat and starting hot or cold up to today's car standards

Highly recommended and thank you to this forum for pointing me in the right direction.
Book 28
Too many 124
Brit01
Posts: 825
Joined: June 28th, 2011, 4:54 pm
Location: Uruguay

Re: MSD IGNITION

Post by Brit01 »

Unfortunately mine failed on me last night again (well on my wife with our 3 year old in the car - she wasn't too pleased)

Anyway haven't pin pointed the issue yet. I hopped in a taxi to the rescue. Swapped over the cables to the old stock system and she kicked into action again and I received an applause.

First time it failed was due to the SS Blaster coil burning out. This time it was running on an old bosch stock coil. Not sure if it burnt that out or the msd unit failed.

Will update with details at the weekend.

Thanks (apart from that it ran like a dream while it lasted - maybe my fault for buying a used analogue msd box!).
n2oxide
Posts: 57
Joined: March 1st, 2011, 7:58 pm
Location: London, UK
Contact:

Re: MSD IGNITION

Post by n2oxide »

Sunbeam Lotus owner had same issue last week. Turned out his unit purchased on an internet auction site was a fake......
A lot of 2nd hand ones for sale because the buyers discover they are fake.

Are you sure only the orange and black are to the coil ?

Perry
GC_86
Brit01
Posts: 825
Joined: June 28th, 2011, 4:54 pm
Location: Uruguay

Re: MSD IGNITION

Post by Brit01 »

n2oxide wrote:Sunbeam Lotus owner had same issue last week. Turned out his unit purchased on an internet auction site was a fake......
A lot of 2nd hand ones for sale because the buyers discover they are fake.

Are you sure only the orange and black are to the coil ?

Perry
Hi Perry,

Yes all wired up correctly. What concerned me was that there was no sticker/label on the back of the case but it was an old model with an old original MSD oil filled coil (swapped at MSD for the SS blaster). (came in an authentic vintage box untouched).

I may well end up opening the unit up to check her out (shame they are riveted). No smell of oil.

Thanks

C
bernie
Posts: 24
Joined: June 25th, 2006, 11:49 am
Location: Southampton UK
Contact:

Re: MSD IGNITION

Post by bernie »

Now they tell me!!!!!!!!
Book 28
Too many 124
Brit01
Posts: 825
Joined: June 28th, 2011, 4:54 pm
Location: Uruguay

Re: MSD IGNITION

Post by Brit01 »

bernie wrote:Now they tell me!!!!!!!!
what have we told you?
n2oxide
Posts: 57
Joined: March 1st, 2011, 7:58 pm
Location: London, UK
Contact:

Re: MSD IGNITION

Post by n2oxide »

Drill the 4 rivets, open it up and post up a picture.

Perry
GC_86
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests