I'm thinking about fitting a turbo 16V top end and GC pistons onto my 8V block and I've been offered a complete 16V turbo coupe with worn cams. I'm trying to establish why they have worm before I commit but was wondering after reading another thread, what cams could I fit as replacements? Will 1.6 16V brava cams be any good? N/A 16V cams or should I look at replacement turbo cams.
Gonna fit the injection system as well and either get the ecu remapped ato remove the immobiliser or get an Omex (they are at the end of my road).
Has anyone else done this?
Any comments greatly appreciated.
(And Guy, I will get around to buying a book)
Jeff
Camshafts
-
- Posts: 62
- Joined: June 22nd, 2006, 7:11 pm
- Location: Teesside UK
- Contact:
Re: Camshafts
I havent done the conversion but i have fitted an Omex ECU/EFI to my Strada powered 131.
If i can be of any assistance let me know, i have plenty of photographs and made plenty of mistakes! on the way.
Steve
If i can be of any assistance let me know, i have plenty of photographs and made plenty of mistakes! on the way.
Steve
Parrish 366
-
- Posts: 18
- Joined: July 19th, 2010, 9:53 pm
Re: Camshafts
Thanks Steve,
That'll be very helpful with the Omex installation, I'll drop you a pm at some point to "tap your knowledge" :-)
Jeff
That'll be very helpful with the Omex installation, I'll drop you a pm at some point to "tap your knowledge" :-)
Jeff
Who is online
Users browsing this forum: No registered users and 162 guests