Painting cast iron blocks

Crank, rods, sealing, pistons, block, flywheel etc
Locked
Guy Croft
Site Admin
Posts: 5004
Joined: Sun Jun 18, 2006 9:31 am
Location: Lincoln, UK
Contact:

Painting cast iron blocks

Post by Guy Croft » Thu Jul 13, 2006 7:09 pm

and now a word from my sponsor....!

This is a very good paint for blocks, durable, easily capable of withstanding block temperatures, you don't need 'engine paint'. In fact you can use Dulux if you want to, but this is better.

Keep a cloth handy wetted with cellulose thinners to wipe machined faces clean, don't put much if any on engine mounting points etc. Only the back and front are painted, not the ends where there are things like seal housings and tensioner.

I usually go right back to bare metal with decarbonising fluid, Jizer, hot wash, brake cleaner etc paint stripper, wire brushes. Nobody wants a 'doggy' block from GCRE. It's therapeutic, anyhow, standing there for an hour painting, helps me relax..
Attachments
x 007.jpg
Fiat X19 1500 block I am preparing for a big valve race unit.
x 007.jpg (112.7 KiB) Viewed 11000 times

Locked

Who is online

Users browsing this forum: No registered users and 1 guest