Page 1 of 1

X19_Tipo_Tempra_Uno head fitting

Posted: Mon Mar 17, 2008 4:30 pm
by Guy Croft
Attached is a download of a GC 'How to' article about fitting these heads that I wrote recently after doing such a heda for for a client with an X19.

Not quite as easy as it looks. If you never fitted one of these heads before, especially if it has competition cams and top hat shims, have a good read. It's easy to put these heads on and completely mess up the shimming by dropping the top hats, buckets and tappets on the floor!


GC

Re: X19_Tipo_Tempra_Uno head fitting

Posted: Mon Mar 17, 2008 4:35 pm
by Guy Croft
and shimming up...