X19_Tipo_Tempra_Uno head fitting

Crank, rods, sealing, pistons, block, flywheel etc
Locked
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

X19_Tipo_Tempra_Uno head fitting

Post by Guy Croft »

Attached is a download of a GC 'How to' article about fitting these heads that I wrote recently after doing such a heda for for a client with an X19.

Not quite as easy as it looks. If you never fitted one of these heads before, especially if it has competition cams and top hat shims, have a good read. It's easy to put these heads on and completely mess up the shimming by dropping the top hats, buckets and tappets on the floor!


GC
Attachments
X19_Tipo_Tempra_Uno SOHC head fitting.doc
(1.36 MiB) Downloaded 2564 times
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: X19_Tipo_Tempra_Uno head fitting

Post by Guy Croft »

and shimming up...
Attachments
Shimming SOHC.doc
(1.35 MiB) Downloaded 2032 times
Locked

Who is online

Users browsing this forum: No registered users and 5 guests