Custom roll cage fabrication recommendation request

Non-engine, eg: aerodynamics, gearboxes, brakes, suspension
Post Reply
mark_hmv
Posts: 6
Joined: Tue Dec 01, 2015 10:51 am
Contact:

Custom roll cage fabrication recommendation request

Post by mark_hmv » Thu Dec 14, 2017 5:10 pm

Can anyone recommend a roll cage fabricator? I am looking to track prep my Fiat Uno and would need a roll cage fabricating and fitting.
Attachments
2017-08-15 14.07.50.jpg
Fiat Uno 1.9
2017-08-15 14.07.50.jpg (174.38 KiB) Viewed 191 times
GC_130

Guy Croft
Site Admin
Posts: 5021
Joined: Sun Jun 18, 2006 10:31 am
Location: Lincoln, UK
Contact:

Re: Custom roll cage fabrication recommendation request

Post by Guy Croft » Sun Dec 17, 2017 4:38 pm

hi Mark

some advice from my friend & renowned race car expert John Brown (John Brown Restorations in W Sussex)



"Hi Guy,

depending on whether a bolt in or weld in cage is required I would use the contacts listed below:

Bolt in:

Safety Devices international Ltd (they may also be able to supply weld in)

1 Enterprise Court,

Studlands Park Avenue,

Newmarket,

Suffolk,

CB8 7EP

Tel: 01638 560524

E-mail: sales@safetydevices.com


Also look on the Demon Tweeks website:

www.demon-tweeks.co.uk

Tel:0843 2032156

They have a range from various manufacturers and useful information.



Weld in:

Custom Cages, (they may also be able to supply bolt in)

Baird Close,

Drayton Fields,

Daventry,

Northhants,

NN11 8RY

Tel: 01327 872 855

E-mail: sales@customcages.co.uk



These two options will give a good starting point, hope this helps,



Very best wishes,

John.
Guy Croft, owner

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests