Ford Cosworth rear Diff in Fiat 124 Spider

Non-engine, eg: aerodynamics, gearboxes, brakes, suspension
Post Reply
Posts: 7
Joined: Fri Jan 06, 2012 8:50 pm
Location: Bochum, Germany

Ford Cosworth rear Diff in Fiat 124 Spider

Post by Sealord69 » Mon Jun 30, 2014 2:53 pm

Hey Guys,

I hope anyone can help me. I would like to fit a Cossie Rear LSD Diff in my Spider. I allready measured all Abarth rear transaxle parts and made production drawings of it.
But I need a little help from one of you guys that has an original Abarth rear diff to send me some data. So that I can make necessary changes to the diff bracket.

Can anyone of you please send me the two dimensions (RED) that are marked with XX and XXX.


Abarth Diff bracket cossi.jpg
Abarth Diff bracket cossi.jpg (77.88 KiB) Viewed 1081 times
Abarth Diff Halter cossi2-Model.jpg
Draft of the bracket
Abarth Diff Halter cossi2-Model.jpg (35.2 KiB) Viewed 1081 times

Posts: 65
Joined: Mon Feb 11, 2013 6:37 pm
Location: Cape Town. South Africa

Re: Ford Cosworth rear Diff in Fiat 124 Spider

Post by FiatRally » Wed Jan 21, 2015 5:06 pm

Wow this looks like a very nice project!

cannot believe that nobody has commented on this in all this time.

I am sure there are a few people that have Abarth diffs that were used in 124 and 131s that can take the 2 measurements and supply this data????

This will also help others to use other diffs and make them fit properly!!

Good luck with your conversion build Nils


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest