Vibra-Technics Delta Integrale Competition engine mountings

Non-engine, eg: aerodynamics, gearboxes, brakes, suspension
Post Reply
DeltaDave
Posts: 71
Joined: August 8th, 2006, 5:56 pm
Location: Stoke on Trent
Contact:

Vibra-Technics Delta Integrale Competition engine mountings

Post by DeltaDave »

Everyone,

As part of my car build I have been liasing with Engine mounting specialist Vibra-Technics to develop a full set of competition spec engine mountings for the Lancia Delta Integrale. As some of you will know Vibra-Technics have made competition engine mountings for other vehicles for many years and have a proven track record in producing quality items. If you wish to view thier products you will find them here http://www.vibra-technics.co.uk/

I have good news, the prototype design stage is complete and I am now able to announce that I am able to offer an opportunity for you to put your name down for one of the first development sets. These first sets will be based on a "group buy" basis and the boss of Vibra-Technics has asked me to come back to him with an order for a minimum of 10 sets to enable him to tool up and make them. The sets will include a direct replacement for All of the original engine mountings and will be a 5 piece set, Front left and right, gearbox mounting, rear mounting and top mounting.

Each set will be approximately £375.00 + vat. The sets are universal to all Integrale's 8v, 16v and Evolution.

If you wish to reserve your set please post in here or make contact with me on the above.

Many Thanks
Dave Harper
Last edited by DeltaDave on June 5th, 2021, 4:50 pm, edited 1 time in total.
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Vibra-Technics Delta Integrale Competition engine mounti

Post by Guy Croft »

Well done Dave, sounds like a MUST-HAVE for these fabulous cars.

G
andy wright
Posts: 38
Joined: September 6th, 2010, 4:43 pm
Contact:

Re: Vibra-Technics Delta Integrale Competition engine mounti

Post by andy wright »

Evening,
Your engine mounts sound really good. Wish I had known about them before I paid out well over 400 pounds for a set of 'uprated' engine mounts from a Lancia specialist from North Yorkshire. Just out of curiosity, what makes these mounts so good and do you do them on an exchange basis (only joking )
Andy
GC_20
DeltaDave
Posts: 71
Joined: August 8th, 2006, 5:56 pm
Location: Stoke on Trent
Contact:

Re: Vibra-Technics Delta Integrale Competition engine mounti

Post by DeltaDave »

andy wright wrote:Evening,
Your engine mounts sound really good. Wish I had known about them before I paid out well over 400 pounds for a set of 'uprated' engine mounts from a Lancia specialist from North Yorkshire. Just out of curiosity, what makes these mounts so good and do you do them on an exchange basis (only joking )
Andy
Hi Andy,

Have you had a look of the quality of the existing kits on the Vibra Technics website? The bracketry quality speaks for itself, they will be also availiable in a choice of 2 compounds, road and competition. If you wish to run big power and want a stable powerplant, Vibra Technics have been making mountings just for this type of application for years, competition proven and tested.

Dave
tricky
Posts: 101
Joined: July 6th, 2010, 5:41 pm

Re: Vibra-Technics Delta Integrale Competition engine mounti

Post by tricky »

Like andy, I have unfortunatly just bought a set of uprated mounts from a well known Lancia specialist in the centre of London. Otherwise I would be very interested.

I tried to view the website from the link you posted but none of the 'buttons' seem to work ? Not telling you how to suck eggs or anything, but have you considered advertising on evocorner ? you may have more luck there or on CLS even.

Incidently I notice the uprated mounts from said yorkshire supplyier have changed in design slightly recently, to a polyurathane material.

Richard
Twice as many valves
andy wright
Posts: 38
Joined: September 6th, 2010, 4:43 pm
Contact:

Re: Vibra-Technics Delta Integrale Competition engine mounti

Post by andy wright »

Evening again,
Thanks for the info. I've had a look and now see your point. They are a country mile better . I would love a set of these quality mounts. Almost impossible to justify having bought a set that have not yet been used (although they are fitted)
Andy
GC_20
DeltaDave
Posts: 71
Joined: August 8th, 2006, 5:56 pm
Location: Stoke on Trent
Contact:

Re: Vibra-Technics Delta Integrale Competition engine mounti

Post by DeltaDave »

andy wright wrote:Evening again,
Thanks for the info. I've had a look and now see your point. They are a country mile better . I would love a set of these quality mounts. Almost impossible to justify having bought a set that have not yet been used (although they are fitted)
Andy
Andy

If you have not had them long why cannot you return them?

Dave
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests