Hi
I have a Fiat Punto GT SOHC head I wish to make use of.
During inspection I noted that two of the cam box bolt holes have been cut right down into both inner inlet ports. I will add some photos.
Does this render the head scrap? How did it pass Fiat QC like that?!
Liam
SOHC Head with cam box bolt holes cut through into inlet port?
-
- Posts: 71
- Joined: August 7th, 2013, 10:37 pm
- Location: Pembrokeshire, Wales, Uk
- Contact:
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: SOHC Head with cam box bolt holes cut through into inlet port?
not unusual, doesn't matter..
GC
GC
Guy Croft, owner
-
- Posts: 71
- Joined: August 7th, 2013, 10:37 pm
- Location: Pembrokeshire, Wales, Uk
- Contact:
Re: SOHC Head with cam box bolt holes cut through into inlet port?
Guy
Potential for boost leak?
Liam
Potential for boost leak?
Liam
GC_36
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: SOHC Head with cam box bolt holes cut through into inlet port?
only if you forget to fit the bolts..
GC
GC
Guy Croft, owner
-
- Posts: 71
- Joined: August 7th, 2013, 10:37 pm
- Location: Pembrokeshire, Wales, Uk
- Contact:
Re: SOHC Head with cam box bolt holes cut through into inlet port?
I best remember them then...
thank you Guy
Liam
thank you Guy
Liam
GC_36
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Who is online
Users browsing this forum: No registered users and 5 guests