Fiat 124 Sump

Question and answer direct with GC. Competition engines and 'live' projects only. Good photos to illustrate your post are expected.
Post Reply
dlh98370
Posts: 12
Joined: June 21st, 2009, 7:03 am

Fiat 124 Sump

Post by dlh98370 » September 2nd, 2010, 3:57 am

All,
I was at the local junkyard today and they have have aquired a Fiat 124. The engine and transmission were dissasmbled in the trunk. The Sump was something I have never seen berore. It was cast aluminum with a Fiat part number on it. It is baffled with doors and about 3 inches deep. The engine appears to be a pre US emissions type. ie no EGR fittings in the cylinder head. The distributor is located on the exhaust side cam box. Any ideas what this is? I was thinking of duying it for my 131.
dlh98370

Guy Croft
Site Admin
Posts: 5032
Joined: June 18th, 2006, 10:31 am
Location: Lincoln, UK
Contact:

Re: Fiat 124 Sump

Post by Guy Croft » September 2nd, 2010, 9:35 am

Photo!

GC

WhizzMan
Posts: 459
Joined: August 13th, 2010, 9:05 pm
Location: Amsterdam, the Netherlands

Re: Fiat 124 Sump

Post by WhizzMan » September 4th, 2010, 1:25 pm

If it can be had for little money, I'd buy it without knowing exactly what it is. A sump like that should easily make enough money to cover for your purchase if you can't use it yourself.
Book #348

dlh98370
Posts: 12
Joined: June 21st, 2009, 7:03 am

Re: Fiat 124 Sump

Post by dlh98370 » September 7th, 2010, 3:11 am

Sorry all,
I have been out of town on holiday. I will go to the breakers tomorrow and get pictures to post.
dlh98370

dlh98370
Posts: 12
Joined: June 21st, 2009, 7:03 am

Re: Fiat 124 Sump

Post by dlh98370 » September 10th, 2010, 4:50 pm

All,
My mistake, this sump must be a Fiat 850 sump not a 124 sump. The part number on the casting says Fiat100OBC419177.
Image


Image

Daniel

Guy Croft
Site Admin
Posts: 5032
Joined: June 18th, 2006, 10:31 am
Location: Lincoln, UK
Contact:

Re: Fiat 124 Sump

Post by Guy Croft » September 10th, 2010, 5:17 pm

Well, you had us all excited there for a while!

To be honest the only alloy sump I have ever seen was sold by Abarth in the 70s and has the distinctive word ABARTH cast along the front edge. Pretty useless piece of kit actually because although it had wings it had not trapdoors which is worse than even a standard sump.

G

tmvolumex
Posts: 165
Joined: July 7th, 2006, 1:43 am
Location: USA
Contact:

Re: Fiat 124 Sump

Post by tmvolumex » September 20th, 2010, 6:01 pm

I have a Fiat Argenta Volumex 2 liter sump that is also aluminum alloy. The sump must be at least a foot deep, no kidding! Maybe there was an Argenta truck!
Tom
GC_31

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests